7" LCD Panel O11 Vision Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the files I used to mount a 7" LCD panel in my O11 Vision PC case
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 745
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
https://www.tiktok.com/@notoccamsrazor/video/7310117366765997342
The brand of LCD panel I used this with is the Geekpi on Amazon - https://www.amazon.com/dp/B0CHRD7CQ3?ref=ppx_yo2ov_dt_b_product_details&th=1
Secure the “LCD Panel Mounting Bracket” to the LCD panel using the screws that came with the panel and 3 of the “Spacer” file. Don't put a screw in the bottom left corner of the back of the display. The spacers are needed because the screws that came with the panel are very long
Attach the “LCD Panel Clip Mount V2” piece to the “LCD Panel Mounting Bracket” using 3.5 mm M2 heat set inserts
Insert 4 3.5 mm M2 heat set inserts into the “LCD Panel Clip Mount V2” piece
The “LCD Panel Clip V2” will fit into the grommets above the motherboard tray of the O11 Vision and bolt to the “LCD Panel Clip Mount V2”
Force the “Shim” between the “LCD Panel Clip Mount V2” and the “LCD Panel Clip Mount V2” for a tight fit to prevent sag/movement
Put the “Frame” of the front of the display
Step files because I hate STL files