1 / 4
Shimano 600, Stronglight, or Sugino Bicycle Crank Dust Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this Crank Dust Cap from scratch, modeled after an existing Sugino dust cap. The thread pitch is 1mm.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
I designed this Crank Dust Cap from scratch, modeled after an existing Sugino dust cap. The thread pitch is 1mm.
Print Settings
Printer Brand:
Prusa
Printer:
MINI
Rafts:
No
Supports:
No
Resolution:
.10mm
Infill:
15%
Filament: Monoprice PLA Gray
Notes:
Threads nicely into a Shimano 600 Crank, as well as a Stronglight Crank
Could make thread diameter slightly larger for a snug fitCategory: 3D Printing