The Jetsons Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Jetsons Logo
This logo can be used along with all my previous Jetson's models to create a complete display.
The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately and glued to the logo.
Enjoy!
Print instructions
Start with a dark blue and then color changes as follows:
layer 1.6mm change to light blue
layer 2.8mm change to black
layer 4.4mm change to white
Following are the filaments I used:
Dark blue: Devil Designs - PLA, Ocean Blue
Light Blue: Devil Designs - PLA, Blue
Black: Devil Designs - PLA, Black
White: Overture - PLA, White
I've included a Prusa Slicer 3MF file that I used for this print with the color changes needed for the main logo.