Kitchen-Aid Mixer Propeller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spinning propeller attachment
- Ocena
- 4 / 5
- Polubienia
- 124
- Pobrania
- 264
- Wydruki
- 1
- Wyświetlenia
- 4462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Spinning propeller attachment for your Kitchen-Aid mixer. My dad wanted this for his mixer so I made this up quick for him. All you need is an M3 bolt in any length between 8 and 16mm. Tighten it enough so that it does not rattle but can still spin.
Note: It does not spin with the mixer as it does not interface with the attachment gearing. It just spins if you spin it. I had not done that because my dad is legally blind and has very, very limited vision so we decided against it as a safety precaution. There is a remix that does interface with that and so will spin if you want that, just check the remixes tab.