1 / 1
Cable Management Box - 200mmx100mmx100mm - 200mmx100mmx75mm — zdjęcie 1

Cable Management Box - 200mmx100mmx100mm - 200mmx100mmx75mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small cable management box that can fit on a standard Prusa MK3S+ build plate

Ocena
0 / 5
Polubienia
10
Pobrania
60
Wydruki
0
Wyświetlenia
579
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I know this isn't a unique idea, but cable management boxes are a bit pricey and I needed a small one that had a pretty securely locking lid since the application was going to be wall-mounted. To that point, there are slotted screw holes that allow this unit to be mounted vertically or horizontally. There are three files: one that is 200mm long x 100mm wide x 75mm high ("shallow"), one that is 200mm long x 100mm wide x 100mm high ("100mmH") and a lid that will work for either unit.

The walls are a little thicker than they need to be, but that does help make the design pretty rigid. I'm pretty happy with how positively the lid locks into place, but it is removed easily enough with the help of the finger hole. There are ample exit/entry slots for cables in all directions.

Apologies that the only photo I have is a somewhat distant picture of two of these in action In a less-than-stellar example of cable management. 

Tagi