Tefifon KC-1 Mounting Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting rack for the German Tefi KC-1 "Schallbandgerät", which is very helpful when working on the chassis.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Changelog:
- June 24, 2021:
- After working with the mounting rack in practice for a while, I have significantly optimized the dimensions.
- In particular, it is now much taller, so that there is also enough space for the motor underneath. Now the mounting rack is suitable for all reasonable orientations of the Tefifon known to me.
- Also the parts have been modified to bend less and the distances to the Tefifon have been minimized. So the Tefifon sits in the rack much more stable.
- Please note that the screw locations on the plate have changed!
- June 7, 2021:
- Fixed some dimensions and improved the look
- June 6, 2021:
- Improved the design by adding an additional step for holding the top of the device when it is not held by screws
- rounded some edges
Description
When restoring old Tefifon units I found it very difficult to work on the chassis without damaging delicate parts. So I designed this simply mounting rack.
Simply print the 4 corners (PETG, 0.3mm layer height), get a 301mm x 193mm plate and mount the corners with 12 pcs 3mm … 3,5mm countersunk screws. The outermost screws must be mounted at a distance of 250mm / 140mm to exactly match the size of the device:
Now you can put the rack on to of the Tefifon and flip it upside-down:
So you can work on the underside of the device without any worries:
In the most current version of the design it also can be used to just hold the top part of the Tefifon (the chassis):
And you then can even flip this part and there is enough space for the motor underneath:
The finishing touch
Since the rack is now frequently in use, I have embellished and waxed the plate. I also bolted rubber feet in original Tefifon design to the bottom:
Design and Source Code
The corners have been designed using OpenSCAD. I have provided the source code for download, so you can adjust the design to your needs.
Happy printing!
If you like this design, then please leave a like and also post a photo in the comments.
Looking for more Tefifon related stuff? Have a look at my Tefifion collection.
You might also want to check out my other designs.