Rubber (TPU) Feet for the Tefifon (or other uses)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M3-mounted replacement feet for the German Tefi KC-1 Ra "Schallbandgerät". Could be handy for other applications as well
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 700
- Wydruki
- 7
- Wyświetlenia
- 2593
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updates
- June 6, 2021:
- Improved the slicing options to result in softer feet
- Added a much larger version of the feet for increased dampening
Description
I designed these feet as a 1:1 replacement for the original feet on the Tefi KC-1 Ra. Depending on the material they are printed in, they can hardly be distinguished from original ones:

I recommend printing them using ColorFabbs varioshore TPU filament at 220°C. But you can use other flexible filament as well, most likely resulting in harder feet. The provided 3MF and G-Code files are optimized for the varioshore filament. SO you might want to adjust the settings when using other material.
There are two sizes to choose from:
- The original size (as it came with the Tefifon): 13 mm x 7 mm
- A much larger size (for increased dampening): 21 mm x 16 mm

The feet mount to the device using the original screws (M3 + tiny washer):

Design and Source Code
The feet have been designed using OpenSCAD. I have provided the source code for download, so you can adjust the design to your needs.
Happy printing!
If you like this design, then please leave a like and also post a photo in the comments.
Looking for more Tefifon related stuff? Have a look at my Tefifion collection.
You might also want to check out my other designs.