Kel Tech Sub 2000 Stock Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Kel Tech Sub 2000 is too short for me to comfortably aim so I built the stock extender that doesn't require drilling
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 596
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
The Kel Tech Sub 2000 is too short for me to comfortably aim so I built this stock extender that doesn't require drilling the stock and is a more secure mount than another model I was able to find.
This was made to utilize https://www.thingiverse.com/thing:3426183 as the butt pad, but I modified their model to give another inch of cushion.
I printed the stock extender in PETG and the butt pad in TPU.
Two sides are connected using M3 screws as well as the butt pad is also mounted with m3 screws and M3 washers (to better hold the TPU pad to the stock).
Print Settings
Printer Brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
No
Supports:
No
Infill:
30
Filament:
Any
Category: Parts