Raspberry Pi 100 x 100 VESA Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Raspberry Pi 100 x 100 VESA mount for the Miuzei Raspberry Pi 3B+/3B case.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount I designed to attach a Miuzei Raspberry Pi 3B+ case to an old monitor I have. The monitor has a 100 x 100 VESA mount pattern. The model is designed for 3mm heated inserts to be used for the Miuzei case to be fastened to. The mount itself is designed to have an air gap between the case and monitor back to promote airflow. The standoffs that are included are to use in case your fasteners bottom out on the mount holes like mine did. I had to use them on the bottom of the bracket (as seen in the cover photo).
I printed this with an X1C using eSun white PETG filament. I used the “generic PETG” filament settings at 0.2mm layer heights and a 0.4mm nozzle. I also printed this with the face of the model on the plate and the legs in the air to eliminate the need for supports.