12v Power Distribution Box for Astrophotography
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12v Power Distribution Box for Astrophotography Run your Mount / Camera / EAF in one to clean up your cabling.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1069
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
12v Power Distribution Box for Astrophotography
Run your Mount / Camera / EAF in one to clean up your cabling.
Make sure you are running atleast 18AWG wiring to handle the amperage. I am using a 12v 5A connector to run my focuser, mount and camera cooling. Uses around 10w for tracking and maintaining the camera temp. Uses up to about 35W while slewing, focusing and camera cooling at the same time. Running everything from an Ecoflow River Pro.
Can screw the lid down with a few small plastic screws or just some super glue to seal it up permanently.