1 / 5
Shower handle for water adjustement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for a shower handle. This is not the best looking one, but it works.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement part for a shower handle.
This is not the best looking one, but it works.
Print Settings
Printer:
JGAurora A1
Rafts:
No
Supports:
Yes
Resolution:
0,2 mm
Infill:
20% Gyroid
Filament:
JGAurora PLAWhite
Notes:
Rotate the STL 180° around X or Y axis before printing, so that the handle lies on its back.
Use some support, it could work without but the surface will be worse.
Category: Replacement Parts
