Shortened spring mount for the Tefifon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shortened spring mount for lowering tracking force on a German Tefi KC-1 Ra "Schallbandgerät"
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you replace the pickup cartridge on a Tefifon (like here) you might find that the tracking force is too high. The adjustment range of the original mount for the spring/dampener-combination is limited:
So I designed a 3d printed replacement part to allow lower tension of the spring:
First tests on the device were promising:
Printing
Because it is a very thin part, I have printed the holder using Prusa's PC-blend filament in 0.3mm layer height. But I guess it might also work in PETG.
Design and Source Code
The mount has been designed using OpenSCAD. I have provided the source code for download, so you can adjust the design to your needs.
Happy printing!
If you like this design, then please leave a like and also post a photo in the comments.
Looking for more Tefifon related stuff? Have a look at my Tefifion collection.
You might also want to check out my other designs.