Ender NG Archetype Breakneck (CPAP) adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Linear rail to linear rod backplate replacement for Ender NG
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOT TESTED YET
Probe mount needs to be moved and 7040 Fan Mount is WIP
Edit 12/23/23
Made backplate beacon compatible and added STEP file. Right angle beacon will be the best fit I think.
Added zip tie holes as well
Should work for other Archetype versions except for Atrocity (Probably could get this one to work with minor tweaks) and Mjolnir
Wanted to use the Archetype Breakneck (CPAP) for my upcoming Ender NG conversion and decided to use this as a good cad exercise. The cad for the Archetype is slightly outdated and for mounting uses these square m3 nuts:
https://www.amazon.com/dp/B06XPFLNBS?ref_=cm_sw_r_apan_dp_7W23M49D35FSE5D1EQQA
Mounting hardware:
2x M3x35 for top
2x M3x20 for bottom
4x M3 heatset inserts
4x M3x10 (Will double check just experiment)
Leave a comment if there's a problem or if you have ideas