Caselabs Mercury S8 USB-C Front Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CaseLabs Mercury S8 Front I/O Panel with extra USB type-C ports
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Since CaseLabs went out of business in 2018 there has been no availability for any spare parts. Having used a Mercury S8 for almost 10 years I really wanted to add USB type-C ports to the front panel of the case with more modern motherboards that have USB 3.2 Gen 2 ports for front panel I/O.
This part is a full replacement for the front I/O that has the 4x USB Type-A, 2x 3.5mm audio ports, the power switch, and the reset. It adds one USB Type-C above the power switch and one below the reset switch. The model was designed around using two of these parts from Amazon: https://www.amazon.com/gp/product/B09YRMQT1F/ for the USB type-C ports. But, the scad file can be modified to add or remove any opening as desired.
I printed this on my Prusa MK3.9 using PLA and a 0.20mm layer height but any filament should work fine. You'll want to print the face side down (so the mounting tabs/wings are elevated off the build plate) and use supports for the mounting tabs as it's much easier to remove the supports this way.
It's not a perfect fit, and it doesn't sit totally flush with the case front, but it is functional. I may refine the model further to correct for this in the future, but so far I've been happy with it as is.