Demon Slayer - Tanjiro HueForge

Print Settings:

• Infill: 100%
• Layer Height: 0.08mm
• Base Layer Height: 0.16mm

Color Swapping Instructions:

Start with Black:

• Use black filament for the initial layers.

Layer #6 (0.56mm): Lava Red

• At the 6th layer or 0.56mm height, pause the printer and switch to Lava Red filament.

Layer #7 (0.64mm): Orange

• At the 7th layer or 0.64mm height, pause the printer and switch to Orange filament.

Layer #12 (1.04mm): Yellow

• At the 12th layer or 1.04mm height, pause the printer and switch to Yellow filament.

Layer #16 (1.36mm): Cold White

• At the 16th layer or 1.36mm height, pause the printer and switch to Cold White filament.

Continue with Cold White:

• From layer 17 onward, use Cold White filament for the remaining layers.

Note: Ensure a smooth transition during filament changes to avoid any artifacts in the print.

Additional Considerations:

• Make sure the printer is calibrated and leveled before starting the print.
• Use a reliable 3D printing material compatible with your printer.
• Adhere to proper print bed adhesion methods to prevent warping.
• Monitor the print closely during filament changes to ensure a seamless transition.
• Post-process the printed model as needed for a polished final result.

Happy 3D printing!