Jadens Thermal Printer Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover for the Jadens thermal label printer that has an integrated spool holder. and storage tray.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was designed to neatly organize your Jadens (or similar) printer as well as the labels all in one unit. It has integrated storage trays as well as a feed slot in the top so that the labels will feed straight into the back of the printer. Additionally, the back of the cover has been extended to conceal the wires and power adapter from view. It also has a small finger slot on the side providing access to the power on/off switch.
Print Settings:
- PLA, PLA +, PLA-CF….
- 15% Infill
- Auto-Generated Supports - Tree or Standard, whichever uses less filament
Orientation:
- Print on its back (the face with the diagonal supports flat on the bed)
This model does require a good amount of support material but the standard (normal/auto) support works great and uses less material than tree.