Shaving/Lathering Bowl with handle & stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
with options for different handles & lathering disc shapes.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 356
- Wydruki
- 5
- Wyświetlenia
- 1056
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Like the band Devo says “Whip it, whip it good”.
The handle is optional, but it feels much more natural than just holding onto the bowl itself.
In addition to your choice of two different handles, you can also choose which style of lathering disc you prefer to use. Personally I prefer the short handle. However, if you like using the longer one and would like a stand for it, just let me know.
I've only tried the one disc, but I'm happy with it's results; as it quickly whips in air to form a nice thick lather.
The separate pieces let you interchange them as you see fit, as well as allowing you to tailor the colours of the different parts of your shaving bowl.
The bowl and the discs can be printed without any supports. The handles should be printed with supports.
Mine was printed with a 0.25mm layer height, 2 walls and 20% infill.
2024-07-13: You can also find a wall mounted stand/holder for it here:
https://www.printables.com/model/942357-wall-mounted-holder-for-joe_224841-shaving-bowl
2023-12-17: Added a stand to hold the lathering bowl with the short handle attached. There are two different files for the stand.
One of them is the entire stand and you will need some print supports for that one.
The other one is the same stand but it doesn't need any print supports; as it has been split into two pieces which need assembly with the dowels & glue.