1 / 1
Bag Clip (Ratcheted)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a ratcheted bag clip that works with PLA, and can be printed in very large versions.
- Ocena
- 4,545 / 5
- Polubienia
- 31
- Pobrania
- 440
- Wydruki
- 7
- Wyświetlenia
- 1380
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 7) (Komentarze: 14)Remiksy (0)Kolekcje (68)Powiązane
Print without supports. Can be printed using PLA.
Print with three walls and 25% infill.
After printing, the hinge may be fused. Gently push the clip closed near the hinge to break it free. If you can't break it free, use the OpenSCAD file to create a version with higher tolerances by changing the “tolerance” variable.
Use the OpenSCAD file to create other sizes.