Rack Mount Adapter for Raspberry Pi5 with Pineberry Pi HatDrive! Bottom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter lets you mount your Raspberry Pi5 with a Pineberry Pi HatDrive! Bottom and an NVME on the modular 2U System
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 146
- Wydruki
- 2
- Wyświetlenia
- 2148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This allows you to mount a Raspberry Pi5 with an NVME on the DAP 2 HE modular 2U rack system. This uses the Pineberry Pi HatDrive! Bottom to connect an NVME to the Pi5.
You will need:
- 8x M2.5 inserts
- 2x M3 inserts
- 2x M3x8mm screws
- Original screws from the HatDrive! Bottom package
Print with default settings, no supports, 15% infill. You can use 100% infill if you want but it is not needed.
To get a dual-color print just let the slicer do a color change at 2mm height.
You can use PrusaSlicer to embed a text on the front. Just put the text on the desired position and let it cut 1mm deep.
Inspired by the Rack Mount Adapter for Raspi 2 and 3 for modular 19" 2U system by tkramm