Snowpeak/Artemis PP750 .22 cal single shot loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single shot loader for the Snowpeak/Artemis PP750 in .22 caliber. Made from printed parts only. No extra material needed
- Ocena
- 4 / 5
- Polubienia
- 19
- Pobrania
- 396
- Wydruki
- 1
- Wyświetlenia
- 1775
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
The Snowpeak pp750 is excellent, but the default single shot tray is a bit fiddly. There are 3D models for single shot loaders that work with the sliding rails but I removed those so I created a single shot loader that works without the rails. I tried to make it so that every part can be printed. The model is a tight fit so a good quality filament and fine print quality is needed. I tried several configurations and I can recommend at least .20mm with high quality printing settings on prusa slicer and I used organic supports on build plate only with .25 overhang threshold. I printed the pin laying down and standing vertical. The laying pin worked best after some sanding. There's also a little ridge that makes the model stick in place, that needs to be sanded down just enough to slide the model in place. This should be possible without too much force.
💗 If the model works for you, please consider clicking the like button
❓Feel free to ask questions or suggest changes that make the model work for you