The Flinstones Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Flintstones Logo. This logo can be used along with all my previous Flintstones models to create a complete display.
- Ocena
- 5 / 5
- Polubienia
- 121
- Pobrania
- 467
- Wydruki
- 19
- Wyświetlenia
- 1097
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Flintstones Logo.
This logo can be used along with all my previous Flintstones models to create a complete display.
The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately and glued to the logo.
Enjoy!
Print instructions
Start with a stone/marble color and then color changes as follows:
layer 8.2mm change to black
layer 9.8mm change to red
Following are the filaments I used:
Marble: Devil Designs - PLA, Marble Dark
Black: Devil Designs - PLA, Black
Red: 3D-Fuel - PLA, Iron Red
I've included a Prusa Slicer 3MF file that I used for this print with the color changes needed for the main logo.
Included is also a zip of parts (excluding the base) that can be used with the MMU/AMS/Palette.