dust extraction Y-junction: 140mm to 2x80mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Y-shaped 140mm dust extraction junction with PETG for tight sealing, recommended 4 walls & 20% infill, printed with 80mm
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
A Y-branch for a dust extraction piping system with 140mm nipple sockets. It is sealed using fabric tape, slid onto a nipple, and secured with a hose clamp. The 80mm hoses fit snugly over it and can also be secured with a clamp.
Depending on the suction force, I recommend using 4 walls and a minimum of 20% infill to prevent potential collapse. I printed this using Extrudr PETG; its flexibility greatly aids in sealing the 140mm connection.
Printing is done with both 80mm connections on the print bed. I suggest using a 10mm brim to prevent warping.