Duet 1HCL Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for mounting a Duet 3D 1HCL expansion board.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Assembly for mounting a Duet 3D 1HCL expansion board in a fan cooled, protected enclosure.
Please leave us a Like/Make of the enclosure, we would appreciate it.
Space inside the enclosure is provided to be used to universally mount the enclosure to any surface, including extrusion. The bottom of the enclosure is 6mm thick and should be more than adequate enough to mount to. Duet drivers are heat-sinked to the bottom of the control board. Fan cooling/air dams were designed to cool these locations directly.
Please keep in mind that this design is under a NON COMMERCIAL license, so don't sell the files or prints using this design.
This box was created under commercially licensed Fusion 360.
Please leave a “Like”, Thanks!
Items needed:
40mm x 10mm case fan
4-4.5mm drill bit
M3 heat inserts M3x4.6x5, M3x8x5.
Insert press (optional)
M3x8 (8), M3x16 bolts (4)
PLA, PETG, Nylon 35% infill
Update: I have added an additional box lid with recessed hex.
Design by: Michael Hathaway, Constantijn Crijnen.