Squeeze Pi Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my remix of arcmatt’s Pi TFT plus case. I added two speaker housings to the outside to make a mini squeezebox…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my remix of arcmatt’s Pi TFT plus case. I added two speaker housings to the outside to make a mini squeezebox for the kitchen.
Just as in the original model I added voids on the middle parts of the speaker housing to allow for M3 nuts to be inserted during the print.
Make sure to increase the infill on the middle parts to assure the nut voids are supported sufficiently.
Here's my Instructable to go along with the files: https://www.instructables.com/id/Raspberry-Pi-Spotify-Player-With-3D-Printed-Case/
Print Settings
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
10%/20%
Notes:
The middle parts need more infill to support the M3 nut voids
Category: Audio