BITTY FUNKO POP Display For Shelf NO SCREWS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just like my other model this one slides onto your shelf and is used to put bitty FUNKO pops on.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 126
- Wydruki
- 1
- Wyświetlenia
- 2278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This model gives you a place to put your bitty FUNKO pops and slides right onto almost any shelf. I made a model to hold 1 bitty pop and one model that lets you put 4 bitty pops with the display case (shown in the photo). If it is too big you can put foam pads on it to make it stay in place
If you have any other size recommendations like three pops or two pops, please let me know.
UPDATE: I made the back plate longer so the pops would be flush with the shelf.
UPDATE 1.2: I flipped the model over, so you don't have to in the slicer.
UPDATE 1.3: added a TEST version for 16mm shelfs and a full version for 16mm shelfs
Print Settings
Nozzle:
0.4mm
Filament:
PLA
Infill:
20%
Quality:
0.2 Fine Strength
Supports:
NONE