Reinforced Sprite Extruder 0 Y Offset and 5015 hotend fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced mounting bracket for a 5015 hotend fan, and 0 Y offset CR-Touch relocation.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 1055
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The general design and fit for the fan I used of @Lasse's version were great. The small gaps I ended up with in the print will not affect performance, as the fan covers them.
The right side mounting ear felt a bit weak and easy to brake. Didn't take much force to snap it from the initial PLA test print.
Took the idea of reinforing it from Cam Rof's 0 Y Offset backplate, and added the type of same reinforcement.
Also closed up the gaps in the wall for a cleaner look.
Show piece is printed in Gray PLA to make the changes more visible.
This makes the reinforment, and closeup of the gaps easier to see.
Used a similar 5015 24v brushless FAN to the WINSINN 5015 24V.