1440 Charity Stream Firefighting Mech FIXES
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had a few people print the mech and report some small issues. These files are the fixes.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you downloaded the Firefighting Mech from the recent 1440 Makers Charity Stream.. you will want to download these files and print these pieces in place of the originals. A few people have printed the mech and there were common issues that seemed to be popping up. So, I revisited these problem areas and came up with fixes for them.
This is NOT the whole mech… you had to purchased the mech in support of the 1440 Makers stream. But, if you did (thank you!) you will want these.
Sorry for having to put the fixes here.. but there was just no good way to send the files directly to everyone that purchased.
Fixes are as follows…
Hands - Increased the diameter of the wrist peg so the hands will stay on better.
Lower Arm - The fit was a bit loose at the elbow, reworked the socket to fit tighter.
Waist - Increased diameter of the peg that inserts into the body to tighten the hip rotation.
Backpack - Increased diameter of peg that inserts into the back for a tighter fit, added concentric rings around the peg to decrease flex in the walls when unpegging the backpack, and added cross braces where the gun mounts to decrease likelihood of breaking the tab when connecting the guns.