Coke Bottle Compatible Foam Sprayer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Foam Sprayer that uses a coke bottle as a soap reservoir
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple Foam Sprayer that uses a coke bottle as a soap reservoir. This design is probably not final and I'd recommend printing it with the nozzle pointing up to improve the pressure resistance.
Full Disclosure, I've only printed this in PLA and it blew up slightly due to the pressure and low wall count imo. I think PETG and higher wall count will fix this issue along with the upright orientation.
Note: if printed in the nozzle-up orientation, it'll require supports.
16 JAN 2024 - Added v2, it is now the recommended version as the other one had a shorter straw and a chance of getting your hose trapped inside it.