1 / 2
Wyze Cam OG front glass mount for Bambu P1S/X1C — zdjęcie 1
1 / 2

Wyze Cam OG front glass mount for Bambu P1S/X1C

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount with shade to mount a Wyze Cam OG to the front glass door of the Bambu P1S or X1C.

Ocena
3 / 5
Polubienia
23
Pobrania
132
Wydruki
0
Wyświetlenia
1323
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple mounting for a Wyze Cam OG to be able to mount to the top of the front glass door of a Bambu P1S/X1C printer.  I've added a shroud to shield out the external lights to avoid reflections off the glass.

The door should still be able to open fully if you run the wire to the left corner.

Print the clip on the side with a tiny support.  The mount itself should not need any support.
Use a piece of 1.75mm filament to join the mount and the clip together after printing.

NOTE: The one in the photo had the legs a bit long, but I didn't want to reprint to waste filament.  The STL should have the proper length.(49mm)

Tagi