1 / 3
Uni-T UTi260B Thermal Imager lens cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip on lens cover for UTi260 handheld thermal camera to protect the sensor
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 337
- Wydruki
- 3
- Wyświetlenia
- 1553
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 11)Remiksy (0)Kolekcje (28)Powiązane
Simple sliding lens cap for the UTi260B thermal camera to protect the sensor better. The camera ships without case or lens cap and I felt that it needed one. while designing additional close-up lens holder I drafted the profile of the camera and out came this cover. Once I receive the extra lens, I will complement the desing using the same profile as used in this cover.
Printed mine on Prusament PLA using 0.3 mm height and without extra supports flat side on the bed.