1" Ring Mount MIL-STD 1913 with Weaver Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1" Ring. The mount is a MIL-STD 1913 with a weaver style mount. As you can see it fits a picatinny nicely. I just…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
1" Ring. The mount is a MIL-STD 1913 with a weaver style mount. As you can see it fits a picatinny nicely. I just opted not to make it with placement bolt. Made for my S&W SD40VE, but with more adjustment. I originally made it for my AR15 but after printing liked it for my 40. it will hold my cree nicely.
This also works as a scope mount. Just adjust accordingly.
Feel free to change up settings for your printer for your best print.
More stuff to come later as time allows.
Print Settings
Printer:
Micromake D1
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.08-.10
Infill:
80%
Notes:
I printed it on end at.10 layer height. 5mm brim, PLA at 190°. This was just a test print. I will lower layer height to about .08 for finish.
Category: 3D Printing