Loupedeck Live S Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand I made for the Loupedeck Live S. Angled at 40 degrees at the top.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 217
- Wydruki
- 0
- Wyświetlenia
- 1246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
I wanted a stand for the Loupedeck Live S that would rise behind my Logitech G613 keyboard. The top is angled at 40 degrees. The main portion of it is solid, I did it this way so people could easily slice off the bottom, or extend it, to make it the height they want. Some may wish to cut the bottom off completely and just have the 40 degree stand bit. It is a slightly tight fit, so if your tolerances are slack you could make it fractionally larger, but it should work for most.
I printed it with 3 perimeters and it's come out great in this nice carbon fibre PLA.