1 / 2
Laser engraver riser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is riser for laser engraver from Two Trees. It rises the laser above (70 mm) the ground.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 770
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (2)Kolekcje (21)Powiązane
This is riser for laser engraver from Two Trees. It rises the laser above (70 mm) the ground. It is meant to be used together with my honeycomb riser.
Assembly and printing:
I have printed mine with PET-G, 0.15mm layer and 3 perimeters.
You will need one M3x12 bolt and M3 T-nut for 2020 extrusions per riser.
I have two front and two back risers (front ones are modified because of the ref plexiglass and electronic box)
The M3 hole has 0.15mm plug for printing without supports.
Enjoy!