Walther PPQ 22lr Rear Sight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The rear sight on my PPQ 22lr broke within days of getting it. The stock sight is cheap cast aluminum with a dovetail…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
The rear sight on my PPQ 22lr broke within days of getting it. The stock sight is cheap cast aluminum with a dovetail that does not extend the whole way across the slot. On top of that, my firearm shot high.
This is a fixed rear sight that address the durability issues and well as the accuracy of the sight picture. There are 5 different height sights. I ended up using the 5.2 rear sight with the #4 front sight that was stock. You may need a different combination for your firearm.
The sight is held on using a #4-40 hex nut pressed into the bottom of the sight and a #4-40 set screw (1/8" long set screw is long enough).
Print with the hex nut hole against build plate (rotate stl file 90 degrees) in super high resolution with supports from build plate. I used tree supports (under experimental in Cura) and they came off very easily.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
100
Filament: Creality PLA
Category: Sport & Outdoors