1 / 8
Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats — zdjęcie 1
1 / 8

Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats (print 2 of each) 15x6 (rear) and 15x4.5 (front) 8mm…

Ocena
0 / 5
Polubienia
0
Pobrania
19
Wydruki
0
Wyświetlenia
291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats

(print 2 of each)

15x6 (rear) and 15x4.5 (front) 8mm hole

The brackets are too wide and these bushes fill the gap.

Fitting Notes:

When fitting the rear seat leave all bolts loose until they are fitted through the bracket (with the rear frame off the bike) before finally tightening. Then fit the rear frame onto the bike.

When fitting the front seat, loosely fasten the bracket to the bike using a 70mm coach bolt, [added a picture for reference] (I filed the hole to fit the square shoulder of the bolt) then lower the front seat into place through the bracket and tighten, fasten springs to bike frame.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.3

Infill:

100%

Category: Automotive

Tagi