The Official SPAM Museum SPAM Star
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For all my SPAM loving friends out there!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I created the original SPAM star as a Christmas neighbor gift gag. After sharing with my manager, he requested one for his friend who works for Hormel and then he asked for another to send to the SPAM Museum. Designed to fit an actual SPAM singles within the star. You'll want to fold the sealed edges of the package before sliding the SPAM in from the back.
I made some improvements over my original design because I found it difficult to get the SPAM packet in and the exterior frame tended to pop off if not taped. So, after some refinement, this SPAM Star was created. It took almost two years, but I was able to get pictures of it proudly displayed in the SPAM Museum in Minnesota.
No rafts are required to print the star, but supports will be necessary. I'd recommend blocking supports for the upper point on the star. There is a built-in hole on the back side that can be used for string or ribbon should you want to hang the star as an ornament.
My original design can be found here: Christmas Tree Spam Star by ICBB | Download free STL model | Printables.com