Philips Hue Bloom Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Philips didn't put any effort into making Hue Bloom lamps easy to position and I finally got annoyed enough to make…
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 221
- Wydruki
- 1
- Wyświetlenia
- 1301
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Philips didn't put any effort into making Hue Bloom lamps easy to position and I finally got annoyed enough to make these mounts so you can mount them under shelves, on walls, pointing upwards etc... There's a vertical mount and 45 degree angle mount which should cover most needs.
Use M3 screws to affix the mount to wherever you want then press the lamp into place and tighten the neck with m3 nut and bolts and/or cable ties/zip ties. Make sure it's tight enough to hold the lamp, if you use nut and bolts remember they can loosen over time so either use threadlock/nyloc nuts or regularly check them for tightness. Cable ties are a reliable choice, use thin ones threaded through through the holes, or bigger ties inbetween the lugs.
Print using a strong fliament, I recommend PLA+. Supports are recommended especially for the 45 degree option.
Category: Household