Bambu Lab build plate holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for X1, P1, and A1 build plates
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 370
- Wydruki
- 1
- Wyświetlenia
- 1901
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nothing wrong with all the other build plate holders on here, but I wanted something that looks cool sitting on the desk, and that doesn't topple over every time you as much as look at it.
It is a rather large print, but it's trellis geometry means it's not much susceptible to warping, even if you print it in ABS and are dumb enough to forget to add a brim (like I did).
It's got a notch in the floor to locate the build plate in the right orientation, and separate Logo plates which clip in place (you can glue them if you like). I've also added a separate stl of a plate with no logo so if you want you can add yours. you need 2 of these.
Doesn't need any supports, and it's solid enough you can just use lightning infill.
Enjoy!