1 / 4
Futurama Planet Express Ship MMU Parts — zdjęcie 1
1 / 4

Futurama Planet Express Ship MMU Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Good news everyone! Ive split up specific stls for printing with different colors in case you have an MMU or equivalent.

Ocena
5 / 5
Polubienia
377
Pobrania
813
Wydruki
3
Wyświetlenia
6641
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

Split up specific stls for printing with different colors in case you have an MMU or equivalent.

  • Teal bits
  • Green bits
  • Gray bits
  • Black bits
  • Red bits
  • Blue bits

This is meant to be printed as separate parts (like the original model) and not a single-whole-ship print. So import all the stl files prefixed with “ship_” as one part; and then import all the stl files prefixed with “shipBTM_” as another seperate whole part; and then “tail_”, "thruster"_", “turret_”, “Wing_Left_”, “Wing_Right_". You can print more than one part on the bed at the same time just make sure to import all the files for that specific part together as a single thing. 

I printed at 150% so the tail logo comes out nicely [at .2mm layer height]. But because of that it won't fit in a MK3S in the originally vertical orientation. Instead, I split it horizontally below the red line. I printed with auto supports from bed, but some things (like the tail logo even) seem fine without.

Ship.Top has 6 colors, but the red is only used on the bottom section. So make sure you swap out your red filament for blue [window] filament after those layers finish. You don't necessarily have to M600; you will have lots of time to get that done. Or do something similar.

Some parts are kinda jank since I had to reduce the mesh in F360, but it works.

The specific teal filament I used is Polymaker PolyTerra PLA - Forrest Green

 

Original model by ChaosCoreTech

Tagi