NodeMCU 1.0 ESP-12E/-12F case (ESP8266, Wemos D1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case with body and lid designed for my NodeMCU 1.0 ESP-12F ESP8266 board access to all connectors
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 188
- Wydruki
- 0
- Wyświetlenia
- 1575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board.
Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html) and needed a case to fit them.
Case provides access at the front side to micro USB connector and power plug as well as to the IO pins and reset button from the top. Case consist out of the case itself and it's lid, which slides on. PCB is kept in place with 4 pillars, placed to fit into the original board holder positions.
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
No
0.2
Infill:
20
Filament:
Basicfil (Amazon) PETG White
Notes:
As you might already guess you should print the "lid" in upside-down orientation, so no support will be needed.
Category: DIY