Christmas Lantern (Luminaria de Natal)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lantern that I developed with a Christmas theme, the screens can be removed, with the possibility of having…
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 903
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This is a lantern that I developed with a Christmas theme, the screens can be removed, with the possibility of having many screen options, the screens are 72x128 mm in size.
Essa é uma lanterna que desenvolvi com tema de natal, as telas podem ser removidas, tendo a possibilidade de ter muitas opções de telas, as telas possuem o tamanho de 72x128 mm.
Print Settings
Printer Brand:
Sovol 3D
Printer:
Sovol SV06
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2
Infill:
20
Filament: 3DLAB PLA RED (VERMELHO) Post-Printing =============
The Lantern lid is screwable so you can carry it by the handle without risk of falling.
A tampa da lanterna é rosqueavel para que possa transportar pela alça sem risco de cair.
At the base, there is space to connect the LED to the battery, with space for a power supply connector and an On/Off switch.
It can be any type of LED.
Na base, tem espaço para poder fazer uma ligação do LED com bateria, com espaço para conector da fonte, e switch On/Off.
podendo ser qualquer tipo de led.
How I Designed This
First, I looked for ideas on the internet.
So I found a Christmas themed pattern, which I drew around the lantern, I decided to make it with 5 sides, to have four with the Screens, and one side to show the pattern.
Primeiro, procurei por ideias na internet.
Então localizei um padrão de tema natalino, onde desenhei em volta da lanterna, decidi fazer com 5 lados, para ficar quatro com as telas, e um lado para mostrar o padrão.
Category: Decor