1 / 8

Turin SD40 / iTop40 Magnetic Chute.

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DF64V inspired, magnetic and split design allows for quick and convenient access for maintenance.

Aktualizacja u źródła: 21 gru 2023

Informacje o modelu

Printed with PETG, which is considered “food safe”. Regular routine maintenance is required, just as with the original aluminum chute.

.1mm layer height

Support ‘Touching Buildplate’ only. See photo for recommended printing orientation.

The silicone declumper has been removed, as it was causing massive coffee grind clogs behind it.

Additional Parts:

(4X) M3x10mm (or shorter), Steel, Hex head screws (not stainless steel). The original screws are about 5mm too long to reuse.

(4X) 4x3mm Neodymium magnets. Glue in with epoxy, such as JB Weld.