"self-centering" DIY chainsaw bike rear sprocket mount/adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is made for a very specific salvaged sprocket and an old bike wheel, use this as more of a guide to model your own.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 551
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Disclaimer
This is made for a very specific salvaged sprocket and an old bike wheel, use this as more of a guide to model your own. - thats why the project files are included (fusion360)
It should center itself pretty neatly thanks to a cone shape that coppies that of the place where all the spokes meet, I have placed some foam between the outer and inner rings, rubber or similiar will work as well. Tighten all bolts equaly like would a cars wheel.
Works well on my homemade chainsaw bike, runs nice and straight without any painful manual centering.