Bedjet Air Hose Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the elastic band that holds the air hose to the Bedjet nozzle. Works with the standard hose and the flat hose.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 176
- Wydruki
- 3
- Wyświetlenia
- 1218
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This clamp replaces the Elastic band that Bedjet supplies with the hose. Simply snaps on to the hose clips and will keep the hose attached. To remove, slide the clamp upwards until loose.
I printed with both PETG and PLA.
.20 Layer height
No Supports
6 vertical perimeters
5 top
4 bottom
The above vertical perimeters effectively make it solid, no infill.
Tested with 4 perimeters, and 20% infill, and worked fine.
There are 2 clamps, a 1" tall and a ¾" tall one. Either one works.
The idea for this was from:
https://www.printables.com/model/584342-bedjet-clamp-attachment
2024-12-19: Due to some theft of my design, I am changing the license model to no longer allow remix. If you need a change, please feel free to reach out to me.