1 / 2
Roku Ultra Mount with Screw Holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed a mount so that it had screw holes instead of VESA mount on back of TV.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Thank you to the original maker for adding the Fusion 360 file. Added #4 countersunk screw holes and removed the VESA mount piece. This sits behind a basement wall mounted TV so the Roku cannot be seen and the VESA mounting holes are in use by the wall mount. Have a small honeycomb storage wall below the TV which will hold the Roku remote.
The opening is large enough to have ethernet (although mine is connected via WiFi), HDMI and power connected.