1 / 2
Reach for the stars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multicolor picture for my kids.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I looked through pixabay and found this picture.
https://pixabay.com/images/id-3340185/
So i converted it to SVG using https://convertio.co/de/png-svg/ But that result is not without its flaws. So i corrected them line by line and so on in Fusion 360, extruded the elements and voilá there is the STL. That took a few hours.
In PrusaSlicer is scaled it up to the Max for my Mini and added Colorchanges on the appropriate layers. Print with 0.2mm layers and a 0.4mm nozzle. Took about 2h to print.
The Filament for the Print with 22 Layers is:
- 1-6: Baselayer, i went with Das Filament Blue Pearl.
- 7-11: Suit, Prusament Galaxy Silver
- 12-17: Helmet and Details, Das Filament Toms3D blue, but maybe i should have gone for something more dark?
- 18-22: Star and Visor, Das Filament Glow In the Dark V2. Yes, it glows in the dark, thats what a star should do! It is not that pronounced, as it still is only 4 layers thick. WIth an MMU, i would try to do the star in 100% Glow.