1 / 1
Creality Ender 3 v3 (E3V3) SE KE Dual Z Axis Pulley Belt Tensioner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have remixed this to create an idler pulley that has adjustable tension for the E3V3 KE
- Ocena
- 4,667 / 5
- Polubienia
- 211
- Pobrania
- 756
- Wydruki
- 4
- Wyświetlenia
- 10 820
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 10)Remiksy (1)Kolekcje (334)Powiązane
Required parts:
2x M5 x 16mm
1x M3 x 12mm
1x M5 Washer
2x F695 Bearings
The washer should go between the top bearing and the printed adjuster. Snug the M3 x 12mm screw, but do not tighten it. The bearings should spin freely.
If you don't use Aliexpress you can sign up here and help me out by making an order. :)