Yamaha GP1800R Stock Pump Plug Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plump plug kit for the stock grate on a 2023 Yamaha GP1800R.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2023 Yamaha GP1800R Stock Grate Pump Plugs
These plugs may fit other years of the GP1800R.
Not all parts will need to be printed. It will depend on how you are planning on sealing the pump. For example, if you plan on using flex seal for all or part, you may only want to use short plugs and/or the fingers.
The long plugs can be used if you just want to silicone something in place and go The short plugs are meant to be used if you want to pour Flex Seal over them to fill the rest of the cavity.
Notes
- If plug 1 and plug 7 are used, you will need to print two of them. The rest of the parts are directional.
- Recommend printing with flex filament.
- The print scale may need adjusted +/- 1-2% due to variances in the intake grate and type of filament used.
- The yellow parts in the photos are hollow test prints to check fit, the included parts aren't shelled.
- Plug 7, 7R, 7L should be printed post up. When gluing in place, make sure the part is inserted just far enough so that the post rests near the edge, but just inside the hole. These parts are purposely longer to help keep product out of the gasket finger area during the pour and are meant to be cut flush and post removed after the void is filled with Flex Seal.
Update Jan 6 2024: Added tabs to Plug 7 to make placement easier.