1 / 2
Mio Dispenser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mounted storage solution to holding your Mio water enhancers.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A wall mounted storage solution to holding your Mio water enhancers.
I printed it standing up on my ender 3 max. Its 308mm tall.
I used two drywall screws to mount it. The holes a little tight for some screw drivers to fit through. If you drop in Mio's when it is empty, they can get crooked so I found loading it from the bottom easier at first. Once full, putting new ones in from the top should work fine.