1 / 2
Neptune 4/Pro/Max Z Axis web cam mount (more screw compatibility) — zdjęcie 1
1 / 2

Neptune 4/Pro/Max Z Axis web cam mount (more screw compatibility)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The tripod screws I got off of Amazon were just slightly too short to work with the original, modified to fit them.

Ocena
5 / 5
Polubienia
50
Pobrania
546
Wydruki
2
Wyświetlenia
2467
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Just a slightly modified version of the original file. The screw I had was just barely too short, so I removed a bit from the mounting point.

 

For reference these are the screws used. Amazon.com : (5 Packs) Stainless Steel D Shaft D-Ring 1/4" Tripod Screw, Mounting Screw Adapter, Quick Release Camera Screw for Camera Camcorder Tripod Monopod QR Quick Release Plate : Electronics

 

I printed at 100% infill with the “Fine Strength 0.2mm” preset in Elegoo Cura and tree supports set to default. The job took just under 30 minutes.